1 Channel Relay & 4 Channel relay Board is a Simple and Convenient way to interface 1 Relays for switching application in your project. Very compact design that can fit in small area, mainly this board is made for low voltage applications.
This instrument is of great advantage in generating signal, scanning waveform, measuring parameters, etc. It's an ideal testing or measuring instrument for electronics engineer, electronic laboratory, teaching and researching..
This card is an excellent choice to gather high speed data from SPM. Some of the data processing can be done in the card so as to send only meaningful result to the computer.
Digital input output board (GPIO) can be used as low cost substitute for PLCs. It can be used where SPM cycle can be written in PC software and is not very time critical. It can also be used where only digital inputs are to be monitored.
In the industrial control applications,serial port is one of the most commonly used means of communication.
Eight channel digital isolation modules are useful in industry where digital signals from sensors, PLC or other input devices need to be galvanically isolated.
PLC based fully automatic End of line test system. These systems are controlled from computer software.
COMASTER STC1000 unit is used for controlling upto three stepper motors. The unit uses standard pulse / direction mode for controlling all three motors. Stepper drive need to be connected externally and a separate power supply is required for the motor. STC1000 requires external 12V power supply and has limit switch inputs. It can be controlled over RS232 serial communication from host such as computer.
.png)